Creating the bridge in Turbo Rater
In order to export quotes from Turbo Rater you must designate a BRIDGE program to transfer information between the rater and WinAA. Set up the bridge by entering Turbo Rater and clicking on Tools. Next select Agency Management Setup. If the WinAA Bridge is not installed, press New to create a bridge, otherwise highlight WinAA and press Edit.
Fill in the screen as shown below and click OK.
Note: You must make sure that you choose Turbo Tags 2.0 as the bridge format.
Configuring WinAA to use ITC Rater
When you select the Auto Policy Wizard for the first time a screen appears that
allows you to select the rating interface.
Choose ITC Turbo Rater from the dropdown list.
Press the save button to complete configuration.
Testing the Interface In ITC
Select a quote and rate it. Choose a company and select Breakdown, Send To and Agency Advantage. Next pull up WinAA and select Auto Policy Wizard from the main menu. The quote you exported should appear on this screen.
Verifying Rating Interface Setup
If you are unsure about your rating interface settings, go to Utilities from the Main Menu in WinAA and choose Set Rating Interface. A screen should appear that is similar to this.
Troubleshooting
A bad quote file can cause the interface to stop working. It will hang during the ‘Processing Quote’ phase. Remove all unprocessed export files by going to the c:\aausr folder and delete the file named itcquote.ttp. Return to ITC and export a quote. Check the c:\aausr folder and see if a new export file has been created. If no export file is found check the bridge setup in ITC. The bridge format must be set to Turbo Tags 2.0. Also make sure that the default output directory* is set to C:\aausr and the default output file name and extension are set to itcquote and ttp.
*Note: The drive letter for the default directory may differ if you are using WinAA in a Terminal Server or Citrix environment. You may need to consult Agency Advantage Technical support or your network administrator before configuring.